Full kits

Sort By:  
High efficiency, environmentally friendly. 30 tube system Commercial application include – Cafe’s – Laundromats – Caravan parks
Add to Cart
$2,599.99
Based on our most popular and original unit, with wet-back and electric heat element inputs. The NS200WB suits households of two people as a standalone unit or even better with booster for a family. It is ideal for instant hot water systems and works very well with storage tank based hot water systems.
Add to Cart
$1,699.99
Our most polular and original unit. The NS-200 suits households of two people as a standalone unit or even better with booster for a family. It is ideal for instant hot water systems and works very well with storage tank based hot water systems.
Add to Cart
$1,499.99
The NS-80WB Micro is an all inclusive ready to install 'Micro' system specifically designed for holiday homes, cabins, caravans, 'Tiny houses'.
Add to Cart
$1,089.99
NS-SC20 - 20 Tube Solar Collector
Add to Cart
$799.99
NS-300WB Evacuated Tube Solar Hot Water System (NS-300WB)

Brand Name: North Solar
Model Number: NS-300-xxx
Capacity: 300L
Type: Evacuated Tube
Tank Pressure: Unpressurised
Circulation Type: Direct / Open Loop (Active)
Heating System: Thermosyphon (Passive)
Connection Type: Direct-Plug
Installation: Bracket/stand
Housing Material: Stainless steel plate
Certification:
Watermark
JAS-ANZ
Australian Standard
ISO9001
Material: Stainless steel, Aluminium, Copper, Glass, Borax

Thickness of the stainless steel (SS):0.4mm
Quality of SS: food grade 304-2B
Pressure test of heat exchanger: 4 Mpa
Pressure rating of copper coil heat exchanger: 40 kg
Heat exchange unit: Copper coil – length=25m, diameter=12mm, thickness=0.8mm
Insulation: 50mm high density integral polyurethane foam
Seals: silicon rubber

Vacuum tube composition: single target vacuum tube – super hard borax and silica glass
Efficiency 93%-94%,
Vacuum tube size: 58*1800mm
Thickness of the glass in tubes: 1.6MM
Vacuum tube composition: single target vacuum tube composed of super hard borax and silica glass, efficiency 93%-94%,58*1800mm
Hail rating:25mm(dia)

High efficiency, environmentally friendly. 30 tube system Commercial application include – Cafe’s – Laundromats – Caravan parks
Add to Cart
$2,599.99
NS-200WB Evacuated Tube Solar Hot Water System (NS-200WB)
Our most popular and original unit now even better with Wetback/Waterjacket inputs.

The NS-200WB suits households of two people comfortably as a standalone unit or a great booster for a family.
It is ideal for instant hot water systems and works well with tank based hot water systems.

WaterMark and Australian Standards certified and ready to plumb in line with existing hot water systems.

Our units DO NOT require any electrical fitting, they only require plumbing up to mains or tank water.

Brand Name: North Solar
Model Number: NS200WB-xxx
Capacity: 200L
Type: Evacuated Tube
Tank Pressure: Unpressurised
Circulation Type: Direct / Open Loop (Active)
Heating System: Thermosyphon (Passive)
Connection Type: Direct-Plug
Booster - External compatability: Electric, Gas, external
Booster - Internal compatability: Electric
Inbuilt booster: optional
Installation: Bracket/stand
Housing Material: Stainless steel plate
Certification: 
Watermark
JAS-ANZ
Australian Standard
ISO9001
Material: Stainless steel, Aluminium, Copper, Glass, Borax 

Thickness of the stainless steel (SS):0.4mm
Quality of SS: food grade 304-2B
Pressure test of heat exchanger: 4 Mpa
Pressure rating of copper coil heat exchanger: 40 kg
Heat exchange unit: Copper coil – length=25m, diameter=12mm, thickness=0.8mm
Insulation: 50mm high density integral polyurethane foam
Seals: silicon rubber

Vacuum tube composition: single target vacuum tube – super hard borax and silica glass
Efficiency 93%-94%,
Vacuum tube size: 58*1800mm
Thickness of the glass in tubes: 1.6MM
Vacuum tube composition: single target vacuum tube composed of super hard borax and silica glass, efficiency 93%-94%,58*1800mm
Hail rating:25mm(dia)
Based on our most popular and original unit, with wet-back and electric heat element inputs. The NS200WB suits households of two people as a standalone unit or even better with booster for a family. It is ideal for instant hot water systems and works very well with storage tank based hot water systems.
Add to Cart
$1,699.99
NS-200 Classic Evacuated Tube Solar Hot Water System (Non-Wetback WB) (NS-200 Classic)

Our most popular and original unit now even better with Wetback/Water-jacket inputs.

The NS-200WB suits households of two people comfortably as a standalone unit or a great booster for a family.
It is ideal for instant hot water systems and works well with tank based hot water systems.

WaterMark and Australian Standards certified and ready to plumb in line with existing hot water systems.

Our units DO NOT require any electrical fitting, they only require plumbing up to mains or tank water.

Brand Name: North Solar
Model Number: NS-200-xxx
Capacity: 200L
Type: Evacuated Tube
Tank Pressure: Unpressurised
Circulation Type: Direct / Open Loop (Active)
Heating System: Thermosyphon (Passive)
Connection Type: Direct-Plug
Booster compatability: Electric, Gas, external
Inbuilt booster: None
Installation: Bracket/stand
Housing Material: Stainless steel plate
Certification: 
Watermark
JAS-ANZ
Australian Standard
ISO9001
Material: Stainless steel, Aluminium, Copper, Glass, Borax 

Thickness of the stainless steel (SS):0.4mm
Quality of SS: food grade 304-2B
Pressure test of heat exchanger: 4 Mpa
Pressure rating of copper coil heat exchanger: 40 kg
Heat exchange unit: Copper coil – length=25m, diameter=12mm, thickness=0.8mm
Insulation: 50mm high density integral polyurethane foam
Seals: silicon rubber

Vacuum tube composition: single target vacuum tube – super hard borax and silica glass
Efficiency 93%-94%,
Vacuum tube size: 58*1800mm
Thickness of the glass in tubes: 1.6MM
Vacuum tube composition: single target vacuum tube composed of super hard borax and silica glass, efficiency 93%-94%,58*1800mm
Hail rating:25mm(dia)
Our most polular and original unit. The NS-200 suits households of two people as a standalone unit or even better with booster for a family. It is ideal for instant hot water systems and works very well with storage tank based hot water systems.
Add to Cart
$1,499.99
North Solar 30 Tube Pressurised Evacuated Tube Solar Hot Water Collector (NS-SC30P)

NEW 2017 model 

  • Install with pressurised storage tanks
  •  
  • Replace flat panels
  •  
  • Modular

Included in Kit

  • 30 Copper pipe Evacuated Tubes
  • 2300mm Manifold Collector
  • Aluminium Channelled  Stand

All systems are Certified and Registered to comply with WaterMark and Australian Standards

Specifications 

  • Heat pipe: T2 copper, top size D14x1mm, body size D8x0.7mm
  •  
  • Highly efficient absorption
  •  
  • High performance - daily average efficiency 50%
  •  
  • Fast heat pipe transfer
  •  
  • Pressure rated over 600kPa (6 bar)
  •  
  • Mains water or pump pressure
  •  
  • No water inside  evacuated tubes
  •  
  • Solar water heater can still work even with  tubes breakage
  •  
  • High efficiency insulation with polyurethane foam
  •  
  • 15+ year service life
  •  
  • Frost resistant


(Frame support available separately)
(12v-36v auto DC pump available separately)

NS-SC30P - 30 Tube Solar Collector
Add to Cart
$1,489.99
North Solar 20 Tube Pressurised Evacuated Tube Solar Hot Water Collector (NS-SC20P)

NEW 2018 model 

  • Install with pressurised storage tanks
  •  
  • Replace flat panels
  •  
  • Modular

Included in Kit

  • 20 Copper pipe Evacuated Tubes
  • 1800mm Manifold Collector
  • Aluminium Channelled  Stand

All systems are Certified and Registered to comply with WaterMark and Australian Standards

Specifications 

  • Heat pipe: T2 copper, top size D14x1mm, body size D8x0.7mm
  •  
  • Highly efficient absorption
  •  
  • High performance - daily average efficiency 50%
  •  
  • Fast heat pipe transfer
  •  
  • Pressure rated over 600kPa (6 bar)
  •  
  • Mains water or pump pressure
  •  
  • No water inside  evacuated tubes
  •  
  • Solar water heater can still work even with  tubes breakage
  •  
  • High efficiency insulation with polyurethane foam
  •  
  • 15+ year service life
  •  
  • Frost resistant


(Frame support available separately)
(12v-36v auto DC pump available separately)

NS-SC20P - 20 Tube Solar Collector
Add to Cart
$1,099.99
NS-80WB Micro Evacuated Tube Solar Hot Water System (NS-80 Mini)

North Solar "NS-80WB micro" Evacuated Tube Solar Hot Water System

The 'micro' range of Solar Hot Water Systems is designed for small hot water requirements of 1-2 people.

These units are also ideal for 

  1. Holiday Homes
  2. Showers near swimming pools
  3. Men Sheds
  4. Barnes 

These units are designed to be self sufficient however also come with a 1500W 240V heating element that can be wired into a standard 20 AMP circuit.

North Solar offers professional high quality, independently tested mains pressure vacuum tube solar hot water systems.

Certified and Registered to comply with WaterMark and Australian Standards.

Included in Kit 

- 80L Stainless Steel Tank

- 14m In-built Copper Heat Exchanger

- Aluminium Channelled Stand

- Header Tank

- 12 Vacuum Tubes

Advantage of Evacuated Tube Solar Collector systems over Solar Panel Collectors:

  1. Larger surface area exposed to the sun at any time due to round structure
  2. Efficient heat absorbance: 92%-94% efficiency
  3. Frost tolerant and can be used in sub-zero temperatures 
  4. Strong and durable with 25mm hail rating
  5. Provide excellent performance in overcast conditions 
  6. Require a smaller roof area than comparable flat plate collectors 
  7. Flat plate collectors are prone to significant levels of corrosion problems
  8. Free Professional technical assistance for installation available 7 days a week. Contact us to arrange.

Specifications

 
  • Single Target Vacuum Tubes - Super Hard Borax Silica Glass: 93%-94% efficiency
  • 12 x 1500mm x 47mm Evacuated Tubes
  • SUS304-2B 0.4mm Stainless Steel - Outer & Inner Tank 
  • 420mm Diameter Tank 
  • High quality SS machine welding   
  • 14m Copper Heat Exchanger              
  • 50mm High Density Integral Polyurethane Insulation 
  

Working principle:

Water flows through a copper coil heat exchanger under pressure. The heat is transferred from the water in the main tank to the copper coil increasing the water temperature.
The main 
water tank acts as a heat storage tank.
 

The NS-80WB Micro is an all inclusive ready to install 'Micro' system specifically designed for holiday homes, cabins, caravans, 'Tiny houses'.
Add to Cart
$1,089.99
NS-SC20L-20 Tube Solar Collector (NS-SC20L)
Collects an additional 90L (approximately) to addition an existing roof system.
Will collect hotwater for storage in separate tank.
Perfect for properties where weight can be an issue or tanks are not permitted (Body Corporate)
  • Non pressurised
  • Long lifespan
12v pump is highly recommended to assist in flow.

Includes:
  • Solar collector Manifold
  • 20 Evacuated tubes
  • Steel coated grey frame


(Frame support available separately)
(12v-36v auto DC pump available separately)

Compatible with:
NS-SC20 - 20 Tube Solar Collector
Add to Cart
$799.99
Per Page      1 - 7 of 7